Safecraft’s Model SC3 (3 lbs) and Model SC5 (5 lbs) for sprint cars are completely automatic and can include a manual backup for added protection. A fast-acting thermal sensor is angled to target hard-to-reach, high-risk areas. Both systems contain 3M Novec 1230 Fire Protection Fluid, which is safe for the driver, equipment and the environment. They are available in white only, and the bracket is included.

New for 2017, this SFI-approved bellhousing contains the flywheel and clutch assembly, and is a direct replacement for all 12-valve and 24-valve (6BT-ISB 1989–2002) and common-rail engines (ISB CR 2003 and up). It's also available for Ford Powerstroke 7.3.

This pump was designed (patent pending) to fit a stock oil pan without modifications. In doing so, the customer does not have the added expense with the pan manufacturer. The pump pickup is separate from the housing cover. The housing cover contains the gerotor gears in the main housing. All pumps include a thrust bearing and axle bearings supporting the main shaft. With this design the main pump can be incorporated into drag racing, circle track racing and boat racing. The design makes changing pan depths easy and less expensive. The gerotor gears and passage ways were computer designed, we have incorporated a 40-degree passage to the inlet port for the dual feed to the gear set. This improves the flow characteristic of the oil that flows through the pump at high rpm's. Center Point's inner gerotor gear is a slip fit over the main drive shaft with snap rings on both sides of the gear containing its position. Standard gears are normally hydraulically pressed over the shaft. Its design makes replacement of the gear on the shaft less time consuming, thus reducing the cost of parts and labor. Housings and housing covers are machined from 7050 aluminum and are type 3 hard anodized. The pump pickups are machined from 6061 aluminum. With the racer in mind, we strive to manufacture a wet sump billet oil pump that is durable and cost effective.

New FAST FireWire spark plug wire sets are designed to make it easy for owners of Gen 5 LT1-powered Camaros or Corvettes to upgrade their ignition system in a few minuntes. They have been custom engineered for perfect fitment and performance. Featuring 8.5-mm ignition wire with a low resistance at 25 ohms/ft, FireWire plug wire sets maximize electrical energy flow to the spark plugs, providing the hotter spark needed in applications with upgrades like high-flow air intakes, custom programing and especially forced induction. An advanced reactive core wire design also provides electro-magnetic “noise” suppression, so radio, computer and other important electronic controls run smoothly and without interference. Additionally, premium heat-sleeved wire sets are available that provide added protection from high under hood temps, 1200 degrees F rated.

ATI Performance Products offers a Vasco Main Shaft for the 4L80E/4L85E tranmission. It's 100 percent machined, heat treated and finished in ATI's Baltimore facility. It's design for center lube transmissions only, while no lube holes help eliminate premature fractures. No modifications are required for fitment, and it's made to be 75 percent stronger than 4340 and 20 percent stronger than 300M. The design was derived from ATI's extreme High HP 400 and PG shafts.

Supertech’s newly developed connecting rods are manufactured from a high-tensile strength 4340 alloy, offering excellent wear and fatigue resistance in optimal conditions. These connecting rods feature H-beam design and come with ARP 2000 bolts capable of achieving a clamp load of 22,000 psi. All Supertech rods are designed in-house using the latest CAD and FEA software to ensure high quality.

Performance Automatic offers its new Blue Chip Street Smart Systems, specifically designed for Ford’s Coyote Crate Engines and new 572 Big Block. These Blue Chip Street Smart Systems include the company’s 4R70W Electronic Overdrive Transmission, custom-built engine-specific torque converter, updated Smart Shift controller and wiring harness with bump shift/paddle shifter capabilities and full throttle non-torque managed shifts, new flex plate, plus all the hardware and components needed for installation. Both of these Blue Chip Street Smart Systems are backed by a three-year warranty. These Blue Chip Street Smart Systems come complete and ready for a simple bolt in. All components are matched to your specific engine.

Stainless Headers Mfg. announced its new line of titanium slip-on merge collectors. These are an ideal option for those applications that need to shave off some extra weight. With a weight savings of close to half of stainless, they are a slip-on solution for existing and new installations. Available in sizes ranging from 1 ½” to 2 ½” primaries, these collectors are available in a variety of secondary combinations. These can also be coupled with the company’s new line of titanium race mufflers for ultimate weight saving performance.

Federal-Mogul Motorparts’ Fel-Pro Gaskets brand now offers an exclusive line of performance turbocharger gaskets engineered to withstand the extreme temperatures encountered in high-end racing engines. Federal-Mogul Motorparts is a division of Federal-Mogul Holdings Corporation. Available for use with T3, T4 and T5/6 turbos, the new Fel-Pro HTA gaskets feature Federal-Mogul’s award-winning High Temperature Alloy and proprietary coating, which can withstand temperatures of up to 1,600 degrees F. In addition to the temperature-resistant HTA alloy and coating, each Fel-Pro HTA gasket features an emboss bead that acts as a spring to maintain sealing contact stress under virtually all operating conditions. The gaskets’ high-temperature coating also helps ensure superior micro-sealing against a broad range of casting finishes.

Design Engineering Inc’s EXO Series Sleeving has all the features of DEI’s popular Fire Sleeve with one benefit that makes it ideal for off-road racing, dirt track or extreme sports. Like the Fire Sleeve, the DEI EXO Sleeve is constructed of high-temperature-resistant glass material woven into a 100 percent silicone sleeve. The exception is that the EXO Sleeve has a 304 stainless steel exoskeleton exterior mesh that provides an added layer of protection to wires, lines and hoses exposed to harsh or abrasive conditions. The EXO Sleeve withstands up to 500°F of direct continuous heat or 2000°F intermittent heat and works as a thermal insulator for wiring, hoses and oil, brake and transmission lines. This sleeve, encapsulated with a stainless steel mesh, allows for air flow around the silicone sleeve when in direct contact with a hot surface making it excellent to use around hot exhaust systems and headers. Sold with two feet of DEI Quick Fix Tape to seal the ends, it is available in two diameters: 3/8” I.D x 3ft (part #010872), or 1” I.D. x 3ft (part #010873).