Rottler Releases Details Of 5th Annual Open House
Image
Rottler will hold its 5th Annual Open House on September 27-29, 2012, at company headquarters in Kent, Washington.
There is no charge to attend the three-day event, which includes live machine demonstrations and technical seminars on Friday and Saturday, a Welcome BBQ at the Rottler plant on Thursday (RSVP required), and a complimentary dinner cruise along the Puget Sound on Friday evening (RSVP required).
Open House hours are as follows:
• Thursday, September 27, 2012 6 p.m.-8 p.m.)
• Friday, September 28, 2012 (9 a.m.-4 p.m.)
• Saturday, September 29, 2012 (9 a.m.-noon)
The schedule of technical seminars is as follows:
Friday, September 28, 2012
• 9:30 a.m.: Precision in Engine Bearings – beyond what you can see presented by Bruce Williams of ACL Bearing Company
• 11:00 a.m.: PRO-SIS presented by AERA
• 1:30 p.m.: Engine machining and assembly procedures that improve performance and reliability presented by David Bianchi of B&G
• 3:00 p.m.: Modern Machining Methods presented by Andy Rottler of Rottler
Saturday, September 29, 2012
• 9:00 a.m.: B&G Plant Tour in Seattle (Bus picks up at 9 a.m. at the Rottler plant)
• 9:00 a.m.-noon: Rottler CAM Training – Learn how to unlock your Rottler’s full potential
Discounted rates at the participating hotels listed below are available by mentioning "Rottler Open House." Complimentary shuttle service from 7 a.m. to 10 p.m. is provided between Seattle-Tacoma International Airport, either hotel below, and the Rottler Plant. Contact the hotel for details and to schedule pickups.
• Comfort Inn: 253/872-2211
• Holiday Inn: 253/395-4300
For more information and to RSVP, visit www.rottlermfg.com/open_house.php.
There is no charge to attend the three-day event, which includes live machine demonstrations and technical seminars on Friday and Saturday, a Welcome BBQ at the Rottler plant on Thursday (RSVP required), and a complimentary dinner cruise along the Puget Sound on Friday evening (RSVP required).
Open House hours are as follows:
• Thursday, September 27, 2012 6 p.m.-8 p.m.)
• Friday, September 28, 2012 (9 a.m.-4 p.m.)
• Saturday, September 29, 2012 (9 a.m.-noon)
The schedule of technical seminars is as follows:
Friday, September 28, 2012
• 9:30 a.m.: Precision in Engine Bearings – beyond what you can see presented by Bruce Williams of ACL Bearing Company
• 11:00 a.m.: PRO-SIS presented by AERA
• 1:30 p.m.: Engine machining and assembly procedures that improve performance and reliability presented by David Bianchi of B&G
• 3:00 p.m.: Modern Machining Methods presented by Andy Rottler of Rottler
Saturday, September 29, 2012
• 9:00 a.m.: B&G Plant Tour in Seattle (Bus picks up at 9 a.m. at the Rottler plant)
• 9:00 a.m.-noon: Rottler CAM Training – Learn how to unlock your Rottler’s full potential
Discounted rates at the participating hotels listed below are available by mentioning "Rottler Open House." Complimentary shuttle service from 7 a.m. to 10 p.m. is provided between Seattle-Tacoma International Airport, either hotel below, and the Rottler Plant. Contact the hotel for details and to schedule pickups.
• Comfort Inn: 253/872-2211
• Holiday Inn: 253/395-4300
For more information and to RSVP, visit www.rottlermfg.com/open_house.php.